full hood lining

View previous topic View next topic Go down

full hood lining

Post  richo on Fri 05 Aug 2016, 12:24 pm

anybody ever fitted a full hood ling to a Holden van that did not come out with one? any help / advice would be appreciated.

cheers Richo. Question

richo
Newbie
Newbie

Posts : 39
Join date : 2010-11-12
Age : 58
Location : penrith nsw

http://philipdotlisa@gmail.com

Back to top Go down

Re: full hood lining

Post  sinbin on Fri 05 Aug 2016, 4:45 pm

You will need a hood bow kit if you want the factory look.

Jason at StickThis sells them: http://stickthisdecals.com.au/hq-wb/hoodling-bow-kits/

Regards, Smooth Cool
avatar
sinbin
Van God!!
Van God!!

Posts : 1085
Join date : 2012-05-13
Location : In front of my 'puta!

Back to top Go down

Re: full hood lining

Post  richo on Sat 06 Aug 2016, 8:28 am

I bought the kit from Sticky not very impressed so far, i have been to the trimmer and no one can work out hot the jagged thingy goes along the back above the tail gate. that will be something to check out at the Holden Day tomorrow. anyway i have found a trimmer who will sought it all out and fit it for about $800.00. which is more than i was hoping to pay but there is not a lot of trimmers around who do this stuff. Exclamation
the hood lining that i bought from Rare Spares looks good, i am too far into it now so i have to keep going.

cheers

richo
Newbie
Newbie

Posts : 39
Join date : 2010-11-12
Age : 58
Location : penrith nsw

http://philipdotlisa@gmail.com

Back to top Go down

Re: full hood lining

Post  sinbin on Sat 06 Aug 2016, 2:26 pm

richo wrote:I bought the kit from Sticky not very impressed so far, i have been to the trimmer and no one can work out hot the jagged thingy goes along the back above the tail gate.

I don't know about Jason's customer service but others seem to like his products. My personal dealings with him aren't so good. The jagged thingy is welded in from memory. Didn't it come with instructions? for hole positions for the bows etc?

I'm surprised you got this bow set so fast.

Regards, Smooth Cool
avatar
sinbin
Van God!!
Van God!!

Posts : 1085
Join date : 2012-05-13
Location : In front of my 'puta!

Back to top Go down

Re: full hood lining

Post  sandman 78 on Sat 06 Aug 2016, 8:46 pm

richo wrote:I bought the kit from Sticky not very impressed so far, i have been to the trimmer and no one can work out hot the jagged thingy goes along the back above the tail gate. that will be something to check out at the Holden Day tomorrow. anyway i have found a trimmer who will sought it all out and fit it for about $800.00. which is more than i was hoping to pay but there is not a lot of trimmers around who do this stuff. Exclamation
the hood lining that i bought from Rare Spares looks good, i am too far into it now so i have to keep going.

cheers

That aint cheap just filling his own pocket find yourself another trimmer thats willing to help and not just grab the money even if you have to travell that bit further just my opinion but your choice

sandman 78
Majestic Vanner
Majestic Vanner

Posts : 327
Join date : 2012-05-09
Age : 49

Back to top Go down

Re: full hood lining

Post  panoz78 on Sat 06 Aug 2016, 8:55 pm

I might be able to help you out ,Try here

https://www.facebook.com/xtrim.motortrimming

From memory the genuine saw tooth that goes across the rear tailgate was pressed in by the factory.
I haven't seen the kit from sticthis but I imagine you could pop rivet it in ,Hate to weld it in the wrong spot..
Give X trim a call it wont hurt to get a second quote .Plus a lot would be determined by what type of material you get it done in .
I spoke to Luke and he'll need to measure to quote properly.. Very Happy

Worse comes to worse bring it over and we'll fit it together ,made one many moons ago


Last edited by panoz78 on Sat 06 Aug 2016, 9:00 pm; edited 1 time in total (Reason for editing : As Epic Dragon would say BRAIN FOG)
avatar
panoz78
MAJESTIC VANNER, Proud, Passionate, Paid Up 2017!

Posts : 1252
Join date : 2012-04-12
Age : 50
Location : Camden

http://cherone@bigpond.com

Back to top Go down

Re: full hood lining

Post  fc59 on Sun 07 Aug 2016, 10:26 am

If you need something welded I can drag my tig out and do it on the spot if you need
avatar
fc59
MAJESTIC VANNER, Proud, Passionate, Paid Up 2016!

Posts : 1337
Join date : 2011-05-04

Back to top Go down

Re: full hood lining

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum