If i win those can someone please

ooooohhhh, spewin mate, they would looked grouse

vanman69 wrote:ooooohhhh, spewin mate, they would looked grouse

Yes mate but thems the breaks,what pcd has your car got ??????

freestyler1 wrote:Anybody near BEENLEIGH/ WATERFORD in Queensland?
Need a ebay item collected dude does'nt want to send down South Vic......

Cheers Al.

Hi mate i live about 30 min from beenleigh if you still need someone to help you out.

FreeMason wrote:

The Zodiac wrote:Great work guys! MV Freight to the rescue again!

ha ha. im just a nice guy helping out as i dont own a van anymore.


Imperfection i have your rims. they are in good nick. just need a good sanding to get the build up off. brighten up with some wet and dry 2000 then machine polish. inside the kidneys are still painted black and good. no gutter rash at all. i clean abit of a rim to have a look. still have all the original machine lines also. you have done well.

It will be nice to see someone of here,so i'll see you on wed all thing going to plan. The only down fall is i'll be in a navara instead of a van

thats ok. if you see in my garage. you see a subaru forester. no van

Imperfection wrote:

vanman69 wrote:ooooohhhh, spewin mate, they would looked grouse

Yes mate but thems the breaks,what pcd has your car got ??????

4x100 yours is 4x110 isnt it? spewin mate, ill see if my mate is interested, he has a laser and a capri, im pretty sure the capri is 120 and the laser is 110, so if you get rims for a tx3, they should fit. some lasers came out with 4x100 too though. ill just ring him and find out what models had 4x100 if you want. ps, you can drop in here if you like mate then i can show you what a real small van looks like, ahh, good friendly aussie rivalry

vanman69 wrote:

Imperfection wrote:

vanman69 wrote:ooooohhhh, spewin mate, they would looked grouse

Yes mate but thems the breaks,what pcd has your car got ??????

4x100 yours is 4x110 isnt it? spewin mate, ill see if my mate is interested, he has a laser and a capri, im pretty sure the capri is 120 and the laser is 110, so if you get rims for a tx3, they should fit. some lasers came out with 4x100 too though. ill just ring him and find out what models had 4x100 if you want. ps, you can drop in here if you like mate then i can show you what a real small van looks like, ahh, good friendly aussie rivalry

No mate mine it 4/108pcd

oh sh!t, so what cars came out with that??

Quite a rare PCD. Mazda RX5, and 1500's maybe and some early Honda Civics.
I had these on my Esky. Enkei mesh.

James with the colour of your van they would look sweet on it mate.

Regards Tony.

Road trip tomorrow

Now I'm confused those are the measurements
I just took,what holes do i measure the 98 or the 120 And if they are 98 can i get them bored out and a set of wheel nuts made to fit

m pretty sure its the 120 mate, pcd is something about circle diameter, so the 120 would be the diameter of a circle??? probably made no sense at all

vanman69 wrote:m pretty sure its the 120 mate, pcd is something about circle diameter, so the 120 would be the diameter of a circle??? probably made no sense at all

Good work Jesse.

Measured Centre to Centre through the Centre.

It's also known as the BCD (Bolt Circle Diameter) in some Circles.

Circles - get it?

Regards

Rusty!

I wonder if i could get them redrilled

Imperfection wrote:I wonder if i could get them redrilled

Gidday James

Please post up a Pic of inside the Mag i.e. the back of the Mounting Flange.

If it is solid i.e. no recesses, you should be able to.

Regards

Rusty!

Rusty62TransAm wrote:

Imperfection wrote:I wonder if i could get them redrilled

Gidday James

Please post up a Pic of inside the Mag i.e. the back of the Mounting Flange.

If it is solid i.e. no recesses, you should be able to.

Regards

Rusty!

I dont have to post that up,i know its recessed

James,contact Morton and May in Liverpool sorry I don't have the number they will be able to tell you once and for all mate.

Regards Tony.

neals wheels in Sydney are/used to drill out the holes too big and put in an offset insert to adjust them to your needs.

Heres the back of them