hz twinthrottle efi conversion

https://i.servimg.com/u/f62/14/82/28/50/01510.jpga little somthing ive been buildinghttps://i.servimg.com/u/f62/14/82/28/50/01712.jpg

bns454 wrote:https://i.servimg.com/u/f62/14/82/28/50/01510.jpga little somthing ive been buildinghttps://i.servimg.com/u/f62/14/82/28/50/01712.jpg

Link no workie

https://i.servimg.com/u/f62/14/82/28/50/01716.jpg https://i.servimg.com/u/f62/14/82/28/50/01412.jpg

hope these are working now https://i.servimg.com/u/f62/14/82/28/50/03011.jpg https://i.servimg.com/u/f62/14/82/28/50/01511.jpg hz red 308 t400 195i clubsport heads and i couldnt buy the manifold i wanted so i made 1

Love that Matt, is that your original ute from behind the shed? Are you going to run the standard Holden computer mate?

yep i have the entire loom from a vn ss and have split it down to 7 wires (off the engine loom) to get it running. ive used a vn sedan tank where the spare was. its like it was made for the hole there. the ute is a bitsa from a rusty hx i had and my old hq got it regoed before the engine attack so onley have to comply to hq emissions and can easily get it running with one throttle hooked up and get it mapped for twins when im ready if it needs it

Very nice

love it mate, tuff stuff, dig the hue too

Nice idea with the bug catcher on the throttle bodies

Wild looking ute Matt!

i was running it around with the twin thrott manifold for a month but the law had other ideas so its been pulled off for the moment untill i come up with another scoop idea to cover them

G'day mate,so was it the bug catcher they done you for surely it wasn't the L88.

Regards Tony.

"leave em"wanting more!

yeah moving parts above bonnet i cut a hole in a stock bonnet but realy need a no 3 pro scoop or a 6in reverse cowl to clear it. it is sitting on a 355 at the moment and ready to go into a vs cruiser that lost its roof for powercruise last weekend

Just a question mate are you based in NSW?

Regards Tony.

Luv your Work Matt.

That's a really cool looking package!

yes an hour south of sydney. the commie was bought for the panels to repair my brothers vs 1 tonner and is still regoed was driven into his panel shop yesterday (30ks) to be all welded up and braced before paint i dont think ive ever laughed so hard

You really are not that fro from me I am in Kingswood near Penrith,by the way I reckon that whole front clip and bonnet would just be the finishing touch for a van

Regards Tony.

"leave am"wanting more!

Gidday Matt

Sounds like you should check out my Project: Majestic Hi-Rise L88 Corvette Scoop/Bulge

yep ive been watching it rusty and love it . a hell ov a lot better than a boring pro scoop