rear shocks for XC Van

He Guys Need some Help!
was wondering if anyone Has Photos of where the Top stud of the rear shocks sits in a Xc panel van? im thinking of putting Trap doors in the Floor Pans so they Can Be Changed out . this will save me heaps of Time thanks
otherwise its Pull all my side boxes out Mattress out and my-be even side Panels Out to get To them.

Hi Mark,

I'll take some photos in the next day or two and post them up for you.

-Rohan.

Rohan
Please Mate if you could that would Be great

Hi Mark,

The mount style is referred to as a "stem stud". (Mine are Monroe shocks with a 17mm nylock nut fitting).

I have ran some masking tape across the join between rear floor and footwell panel, just to make it easier to show up. These photos were taken from the driver's seat, so looking toward the back of the car. The access panels are 315mm - 400mm from each wheel arch, and 35mm - 70mm forward from the floor/footwell join. (I measured both sides, just to be sure they're the same. Don't want any surprises).  

Looks like this: 









Hopefully this tells the story for you. If you're after any other photos or measurements, no problem just let me know. Happy to help out.


Cheers,
Rohan.

Rohan
thank u !!! you are the Best Mate:D
I appreciate the Effort to Make sure I got all the Info I Need .defiantly need to buy u a beer LYW ( love your work)

No worries Mark, got to look after the Ford guys.
Geelong All Ford is on this weekend too. I'm not going this year, but pretty sure Adrian is taking his XC (Princess) down so keep an eye out for him.

-Rohan.

Rohan
im in as well will hopefully be in the same area so we can catch up But will look out for any of the MV family

Great to see the MV Spirit at work!

Rohan
you were spot on with your measurements and thanks For help out Heaps of Happy's To U Mate